Winter Plaid Jacket

B 11-2010-133 side

So, after not doing anything with Marfy 1401 but letting it percolate in the back of my mind, I’ve come to the conclusion that I like the idea of that coat, but I don’t really like the idea of that coat in my life.  Why?  Well, simply put, I like… no…. LOVE the collar, but I just don’t need a long swing coat in my wardrobe.  If I need to dress up and it’s cold, I’ve got choices.  I could have played the Marfy down with the wool plaid, but in reality, I just want a casual coat that I can throw on and run errands in that isn’t a ski jacket.  Now, I hear you all.  Yes, I could have shortened the Marfy pattern, but I didn’t want to for some inexplicable reason.  I’m sorry to disappoint, but the Marfy Lab Coat project is officially dead.  So I went mentally wandering through my patterns for something else.

B 11-2010-133

B 11-2010-113 drawingEnter BurdaStyle’s November 2010 issue, #133.  It’s got bands, pockets and is a big, casual design with no fussing.  Win!  I chose this pattern because I liked the idea of bias bands with this plaid.  The fabric is wonderful.  It was a thrift store find a couple of winters ago that was originally intended to be a maxi skirt, but it was a bit on the heavy side, and so languished in stash until now.  I washed and dried it in the dryer about 3 times to get it to felt a little bit.  The process added the weight I wanted. The coat is not lined, but I lined mine with kasha lining. I made no adjustments other than sleeve length, although I did change up the construction a bit.

The first big change I made was to cut strips of bias for the bands and forget about Burda’s pattern.  I cut them 10.5 cm wide and washed them again to fray the edges a bit.  My idea was to overlay the edges of the coat itself and topstitch them into place rather than encasing the band between the coat and lining.  I wanted the casual frayed edge.  I did not interface the bands.

B 11-2010-133 front band

I measured 3 cm in from the edge of the coat and laid the inner edge of the top band along the markings.  There was a lot of easing and shrinking to do at the curved front bottom edges.  Once the top band was basted into place, I laid the band facing in place (wrong sides together) matching up the outer edges of the facing and band and topstitched them together.  Then I stitched through all thicknesses to attach both layers to the coat itself.  I really like how it looks.

B 11-2010-133 back band

I liked the idea of topstitching the pocket to the front, so I did that.  And I wanted a rolled-back cuff look but without actually having to roll the cuffs back.  The sleeves were long on me without the cuffs attached, so I trimmed about 4 cm and machine stitched the lining in place.  inside of sleeve

Then I stitched the cuffs and cuff facings together around the edges like I did the bands.  I folded them in half and stitched the edges together like a French cuff and laid the entire cuff over top of the sleeve.

cuffs

Needless to say, that’s a lot of layers, so I used a fell stitch to attach the cuff to the outside of the sleeve, and then a long back stitch on the inside to attach the edge of the sleeve to the cuff.  The cuffs extend past the sleeve edge by about 4 cm.

B 11-2010-133 pockets

It thoroughly snowed on Friday – FINALLY.  I’ve been waiting since October for decent snow.  Yesterday it was all sunshine and sparkles with a blue blue sky – just gorgeous!  The snow makes everything brighter.  I love winter.  Today, it’s supposed to rain, so the snow seen in the pics is actually half of what we got in about 24 hours last Friday.  Loved it!  Winter is supposed to be full of white fluffy cold stuff!

B 11-2010-133 back 2

I didn’t put any fastenings at the CF (I may change this later and add snaps) so I’m holding it closed with a belt.  Haven’t put any belt loops as of picture-taking time, but I think I’ll add some.  And now that the snow’s scheduled to melt in the rain today, I’m ready for those casually dressed errands without a ski jacket.

B 11-2010-133 front