Vogue 8600

Vogue 8600 side front

Here’s my latest matelassé project, Marcy Tilton’s jacket.  It’s got a large, oversized collar and deep pleats at the waist for shaping.  The pattern photos must be made with a thin taffeta fabric, because the jacket looks super crisp.  Mine doesn’t because of the bulky fabric I chose to make. Mine also seems to have more shape, because the body inside it has waaay more shape than the model’s, which seem to sit perfectly straight from shoulder to hemline.

The matelassé was bulky and had a mind of its own, so each seam and box pleat is catch-stitched down in order to ‘press’ the seams.  Pressing a scrap of the matelassé completely flattened it. Not good.  I tried ‘pressing’ the pleat edges through the hem bands in the front as the line drawing indicates so that they’d be crisp, but the fabric moves a lot on its own, and the edges/corners would not lay flat.  So I left them alone as a nod at a peplum look.

Vogue 8600 side front 2

The cuffs are very deep – about 8 inches (20cm) – and are designed to be folded back, if desired.  I’ve been wearing them not quite doubled back in half as they seem too short exactly in half, and too long not folded up at all.  And the back pleats release at the bottom of the shoulder blades.  I made a sway back adjustment, and shortened the waist on this version, but you can see how it balloons out in the back while being worn.  I’m sure most of this is due to my fabric choice.

Vogue 8600 back

As mentioned in my previous post, the front facings, undercollar and hem facings were all cut from a crinkle polyester taffeta from deep stash.  The lining is rayon bemberg in a tone-on-tone match with the crinkle taffeta.  No one’s going to see it, because this jacket looks pretty weird unbuttoned.  Here’s the underside of the collar.

Vogue 8600 under collar

See how large this thing is?  It looks fabulous as a dramatic collar, but it’s not quite big enough to keep one’s head warm.

Vogue 8600 collar

My final thoughts on this:  It’s an interesting fabric in an interesting jacket pattern.  I think if I had made it out of a crisp taffeta (suggested fabric, btw), it would have looked like a box with a big collar on me. It has an extraordinary amount of ease – no FBA required! I have long wanted to make up this pattern, just for the collar, and I’m happy I did.

Advertisements

Bound Buttonholes and Matelassé

matelasse taffeta bound buttonholes

I’m working on another matelassé jacket, and kinda sorta wanted to do bound buttonholes.  I used a crinkle polyester taffeta, stabilized with fusible interfacing, as the contrast binding and the facing on the centre front pieces of the jacket.

crinkle taffeta facing

The matelassé is a gold/olive green/black weave in I guess what you would call a ‘patchwork’ pattern. The gold crinkle taffeta was the best match from my stash.

Vogue 8600 buttonholes

Can I just tell you that I decided to make bound buttonholes after the facing and collar was attached?  I had planned to go the lazy machine-stitched buttonhole route, but after a series of trials on scraps, decided bound buttonholes would look the best.  Instead of a straight-forward set of buttonholes, this became a fiddling-redo-rip-out-redo game, but I’m happy with the results.

What’s the best make-it-unnecessarily-difficult-extra-work decision you’ve ever made on a project?

Croc Matelassé Jacket

Matelassé Jacket

I can’t remember when I purchased this roll end from EOS, but I have finally pulled this gorgeous piece of matelassé from my stash to meet the PR Sewing Bee Round 3 challenge:  a lined jacket.  The pattern is Burda 08/2008 #127, an issue which Burda 08-2008-127 drawingI purchased for a different jacket a couple of years ago, and was pleasantly surprised to find this simple jacket pattern would – with some playing around – accommodate my limited matelassé yardage.  I put the project into queue and forgot about it until now.

The jacket is designed as unlined, but I lined it.  I did not have enough fabric for proper facings.  As it was, I had to piece together the front edge facing and forego the extension into the shoulder as well as the back neck facing.  The sleeves are lined to the cuff edge.

front facing and cuff details

I have never worked with matelassé before, so this was a new adventure.  My fabric made it a troublesome adventure because it was like sewing with two completely different fabrics.  The matte part of the design was stable and behaved solidly like a quilted fabric – much like I expected matelassé to behave.  However, the metallic portion was designed to be difficult, comprised of fluffy loose polyester fibres sandwiched between copper lurex threads and rather unstable black polyester threads.  The lurex was incredibly flimsy, so I underlined it with pre-shrunk cotton/poly broadcloth.

underlining

Then I realized topstitching by machine was not going to look so great, so everything was done by hand:  understitching, edgestitching and topstitching.

front edge pickstitch

The hand work was relaxing, and I liked how it didn’t interfere with the fabric and finished the edges nicely.  I balked at doing the buttonholes by hand, but they disappear into the fabric.

detail

I was pleasantly surprised at how warm this jacket is, even with only a rayon bemberg lining.

Matelassé Jacket

The roll end fabric repeat was a big problem.  I’m not very skilled at good fabric design placement in garments (yet), and my roll end began and ended in the middle of one repeat.  After going back and forth and shading in the line drawing several ways, I settled on the metallic gradation dripping down from the shoulders, and the clean stark line of it giving the illusion of deep cuffs.

 Matelassé Jacket

Just a note on the pattern.  It’s a plus-sized pattern (44-52), and I’m so pleased with the fit of it.  I made a very small (for me) 2cm (3/4″) FBA; cut the back and side back pieces as one to conserve fabric (incorporating the curved side back seams as a dart) and shortened the back waist by about 5cm (2″) by simply moved the centre/widest part of the dart up to where my waist sits.  I did a 1.5cm (5/8″) forward shoulder adjustment and decided I’d put in 1cm (1/2″) thick shoulder pads rather than do a sloped shoulder adjustment.  I felt the lurex matelassé could use the extra help through the shoulders.

croc metallic jacketYou can see more pictures of this project in my Flickr album, and read my PR review here.